
Add to Cart
SR-TT-PU-ND/NL,U-Type Photoelectric Switch
Working voltage: DC5-24V
Compatible with transistor-transistor logic 5V voltage
Response frequency >1KHZ
Minimum detection object: φ1mm
NPN output, maximum current =100mA
There are two types of dark pass and bright pass
When in the "ON" state, the LED lights up
Operating temperature -25℃-+70℃
model | SR-TT-PU-ND | SR-TT-PU-NL |
specification | Dark channel prior | LITHONIA LIGHTING |
working voltage | DC5-24V | |
Allowable ripple voltage | <10% | |
Backlight current | 5-100mA | <10mA |
Through the light current | <10mA | 5-100mA |
Output voltage during shading | Approximate to the supply voltage | <0.7V |
The output voltage during light transmission | <0.7V | Approximate to the supply voltage |
switching frequency | >1KHz | |
Minimum detection object | ∅1mm | |
Type of light source | Infrared light (880nm) | |
output mode | NPN, maximum current =100mA | |
groove width | 3.5mm | |
short-circuit protection | no | |
level of protection | IP65 | |
operating temperature | -25-+70℃ | |
EMC | IEC 60947-5-2,Parts7.2.6.1.2.3 or RFl>10V/m(in 30-1000MHz).EFT>1KV,ESD>4KV(contact) | |
Inferior vibration resistibility | IEC 60947-5-2,Part7.4.2, frequency 10-55Hz, amplitude 1mm, 30 minutes in each direction X,Y,Z | |
impact resistance | IEC 60947-5-2,Part 7.4.1, using an acceleration of 30g, a duration of 11ms, six times in the X,Y, and Z directions | |
canning material | PBT | |
connecting line | φ2.7mm PUR,3X0.1m²,2m | |
Dimensions drawing (unit: mm) | circuit diagram | |
![]() | ![]() |